Workgroup Contents
Lecture 3.6 : Inspection/Quality Assurance
Top
1. INTRODUCTION/DEFINITIONS
2. OBJECTIVES
3. SAFETY MARGINS
3.1 Process Variations
3.2 Gross Error
4. RESPONSIBILITIES
4.1 Involvement
4.2 Evolution through Practice
4.3 Causes and Prevention of Failures
4.4 Timing
4.5 Specialisation
4.6 Records
5. MAIN TYPES OF INSPECTION
5.1 Design
5.2 Manufacture
6. STAGES OF INSPECTION
7. METHODS OF INSPECTION, PURPOSE AND ACCEPTANCE CRITERIA
7.1 Identification
7.2 Chemical Analysis
7.3 Mechanical Tests
7.4 Dimensional Measurements
8. CONCLUDING SUMMARY
9. ADDITIONAL READING