Workgroup Contents
Lecture 12.3 : Effect of Workmanship on Fatigue Strength of Longitudinal and Transverse Welds
Top
1. INTRODUCTION
2. LONGITUDINAL WELDS
3. TRANSVERSE BUTT WELDS
3.1 Effect of Internal Defects.
3.2 Effect of Welding Procedure
4. OTHER WELDS
4.1 General
4.2 Transverse Fillet Welds
4.3 Load-Carrying and Non Load-Carrying Attachments
5. INSPECTION
5.1 Inspection of Longitudinal Welds
5.2 Inspection of Transverse Butt Welds
5.3 Inspection of Other Welds
6. CHOICE OF QUALITY
7. DESIGN CONSIDERATIONS
8. CONCLUDING SUMMARY
9. REFERENCES AND FURTHER READING
10. ADDITIONAL READING