Workgroup Contents
Lecture 11.3.1 : Connections with Non-Preloaded Bolts
Top
1. INTRODUCTION
2. PRINCIPLE OF LOAD TRANSMISSION
3. DIMENSIONS OF THE BOLTS
4. BOLT GRADES
5. DIAMETER OF THE HOLES
6. NOMINAL AND STRESS SECTIONS OF
7. SHEAR RESISTANCE
7.1 Normal Joints
7.2 Long Joints
8. BEARING RESISTANCE
9. TENSION RESISTANCE
10. BOLTS SUBJECT TO SHEAR AND TENSION
11. SPACING REQUIREMENTS
11.1 Basis
11.2 Connections of plates
11.2.1 Minimum end distance
11.2.2 Minimum edge distance
11.3.3 Maximum end and edge distances
11.2.4 Minimum spacing
11.2.5 Maximum spacing in compression members
11.2.6 Maximum spacing in tension members
11.3 Angles Connected by One Leg
11. CONCLUDING SUMMARY
12. REFERENCES